15mm Shaft 4.2m/S C Type Rolling Ring Traverse Drive

GP3-20 Ball Bearing Rolling Ring Traverse Drive With Support Bracket Variable Traversing Speed China Factory Direct

Principle

The principle of operation of the rolling ring drive is based on the transformation of the rotational movement of the drive shaft into a linear movement of the rolling ring drive on a smooth shaft in two directions using the interaction of friction forces between the drive shaft and the collars of the ball bearing mechanism for switching the stroke of the rolling ring drive.

The main advantages of the rolling ring xindian drive principle

1.Highest possible efficiency due to the fact that the gear and the payload are completely supported by roller bearings

2.Automatic traversing movement

3.Variable traversing speeds ranging from 0 m/s to a maximum of 4.2 m/s; can also be separately set for the two directions with constant rotation of the shaft

4.Variable traversing width and traversing position

5.High dynamics at the points of reversal

6.Can be released from the shaft

7.Low operating costs

8.Low maintenance requirements

1 - folding carriage; 2 - roller bracket; 3 - vertical roller; 4 - horizontal roller; 5 - smooth shaft; 6 - support bracket; 7 - guide rail; 8 - hairpin; 9 - restrictive nut carriage stroke; 10 - bolt for adjusting the distance of m/s rollers; 11 - keyway under the pulley

Product Tags:

C Type Ring Traverse Drive

      

4.2m/S Rolling Ring Traverse Drive

      

15mm Shaft Ring Traverse Drive

      

Parameters of linear traverse units
Model	d1	d2*	L1*	L2	L3	L4	L5	L6	Md
GP3-15	15	15	430	13	72	-	47	-	M8
GP3-20	20	14	450	14	102	40	41	25
15mm Shaft 4.2m/S C Type Rolling Ring Traverse Drive Images